Current File : //proc/353637/root/bin/sg_verify
ELF�@�@8	@@@@��888�,�,��������������TTTDDP�td�+�+�+<<Q�tdR�td������``/lib/ld-linux-aarch64.so.1GNUl���/P*�����j5GNU F�s X"<��y�_�f �g+m�&����Qlz�, ��_ITM_deregisterTMCloneTable__gmon_start___ITM_registerTMCloneTable__libc_start_main__cxa_finalizeabortgetopt_longpr2serroptargsg_get_numsg_get_llnumoptindsg_cmds_open_devicesg_ll_verify16sg_ll_verify10sg_memalignstrcmpsg_set_binary_moderead__errno_locationsg_convert_errnofreesg_if_can2stderrsg_cmds_close_devicesafe_strerrormemsetcloseopen64perrorsg_get_category_sense_str__stack_chk_fail__snprintf_chk__stack_chk_guardlibsgutils2-1.46.so.2libc.so.6ld-linux-aarch64.so.1GLIBC_2.17GLIBC_2.34� ������������������@�*0�*P@p�*�0��*��*��*�*0�*P�*p�*��*��*��*��*+0+����	����� �������
��
� �(�0�8�@�H�P�X�`�h�p�x�����������!��"��# �{����B��{���_��{����jG�B;� � � � ���nG�b;� ���rG��;� ���vG��;� ���zG��;� ���~G��;� ����G�<� ����G�"<� ����G�B<� ����G�b<� ����G��<� ����G��<� ����G��<� ����G��<� ����G�=� ����G�"=� ����G�B=� ����G�b=� ����G��=� ����G��=� ����G��=� ����G��=� ����G�>� ����G�">� ����G�B>� ����G�b>� ����G��>� ����G��>� ����G��>� �?#�����B�G��{��C��S��*���[�����c��B���k���1�����s�S,��R@@�������R ���R�R�#����R�)���C��K��+��)�)�
)�s���� ����������*�w�����1�T�Q?qiT�$��*�@�f����8�R@4�b���[axbA�!� ֟$����G�@������*q�T�8�R`�Q����$��R�@4�K������G���@�@�B��ҁGT�{Y��*�SZ��[[��c\��k]��s^�����#�_֟$����G�@�}����*q���T�8�R@3�.�����$� �R�[�����$� �R��K�����$����G�@�g����C�qm5T �R�_�����$� �R�3�����$� �R�7�����$����G�@�T����*1�3Tq)�T�8�R`��������$� �R�c�����$� �R�g�����$����G�@������1T�+�{���$����G�@���u���$����G�@�.����#��q��T�8�R�3��������$����G�@������ ��8�R�2��������$� �R�o�X���$� �R�k�T������G��@�k�T���K@�q�3@�@zAT�3@�`5?q
T�_@�q{��5�@��{@�?�&T�k@�q�[@�@z�@�@�%T�C@��R?k�7@��ןR3
?j�T?q�B1��!�0��AЁ�`������+@��@����@��hT`R�7��#@�?q�ן?j�T�������?qLT��5��A9�*������3���7�7@����1��C��r�7��@1��@�����+@�����g@������o@�5R�#����������'����T�7@����җ�4�#@����#@����3@������*�C9�*���*����5�˔������`�?k*�T������`���F����@����@�k��T�8�R@4�<�����@��C@�?� ��T���4���}���@����3@��*�#9�����*�*�*�*S������`�#�����!@����R�����q
�T���R@�������+@��@��@�!�!�?���T�7@��5��	��� �R�7�~���q����ן�*�RT�����`��k@�a5�[@���5�@����!����� 5�R��� �7�4�� ����R6�R�R�?k
T"Ka�7��*B|@����q�T-���@�����*�4� 1����@���* !�����?@�@���4q`�R������*�(�����7�)������\4�@�_��T�+@���� '��������3@������*@�7�?@��R��������'@����*8q`T
Tq�Tq�T������"������3@�����`��6�K������@@(��������*�K�5�*�����*�����!�����8�R�@4������������R�������5���8�R��{���0��"@���R{�����5�*�����8�R@2�n���#���8�R��i������8�R��d������@��R�����*�
�7I���`�6���I���o��HqAT�7@� 4�C@���� $�O�������*���������@"�G�������q�
@z��T������%�>�������#��*���*
�R��z����@����`&���0���������&�+�����������`#�%�������*��� �����RN����*L���s@����%����y���3@��R����* �6�K�*J������@@(�
���y�����W���@��#�4����*�@� ������ �B�R����������(��������� � � � ��������@��#������G���������������G�@���_� � ����	���!�	�?�T��!�G�a����_����	���!�	�!�"��A��!�A�����B�G�b����_� �{��������`�I9@7���G�����@�������� �R`�	9�@��{¨�_� � ��� �{�����{���_�countbpcstdinVERIFY(16)VERIFY(10)0b:B:c:dE:fg:hi:l:n:P:qrSvVbad argument to '--bpc'
bad argument to '--count'
bad argument to '--ebytchk'
bad argument to '--group'
Usage: sg_verify [--0] [--16] [--bpc=BPC] [--count=COUNT] [--dpo]
                 [--ebytchk=BCH] [--ff] [--group=GN] [--help] [--in=IF]
                 [--lba=LBA] [--ndo=NDO] [--quiet] [--readonly]
                 [--verbose] [--version] [--vrprotect=VRP] DEVICE
  where:
    --0|-0              fill buffer with zeros (don't read stdin)
    --16|-S             use VERIFY(16) (def: use VERIFY(10) )
    --bpc=BPC|-b BPC    max blocks per verify command (def: 128)
    --count=COUNT|-c COUNT    count of blocks to verify (def: 1).
    --dpo|-d            disable page out (cache retention priority)
    --ebytchk=BCH|-E BCH    sets BYTCHK value, either 1, 2 or 3 (def: 0).
                            BCH overrides BYTCHK=1 set by '--ndo='. If
                            BCH is 3 then NDO must be the LBA size
                            (plus protection size if DIF active)
    --ff|-f             fill buffer with 0xff bytes (don't read stdin)
    --group=GN|-g GN    set group number field to GN (def: 0)
    --help|-h           print out usage message
    --in=IF|-i IF       input from file called IF (def: stdin)
                        only active if --ebytchk=BCH given
    --lba=LBA|-l LBA    logical block address to start verify (def: 0)
    --ndo=NDO|-n NDO    NDO is number of bytes placed in data-out buffer.
                        These are fetched from IF (or stdin) and used
                        to verify the device data against. Forces
                        --bpc=COUNT. Sets BYTCHK (byte check) to 1
    --quiet|-q          suppress miscompare report to stderr, still
                        causes an exit status of 14
    --readonly|-r       open DEVICE read-only (def: open it read-write)
    --verbose|-v        increase verbosity
    --version|-V        print version string and exit
    --vrprotect=VRP|-P VRP    set vrprotect field to VRP (def: 0)

Performs one or more SCSI VERIFY(10) or SCSI VERIFY(16) commands. sbc3r34
made the BYTCHK field two bits wide (it was a single bit).
bad argument to '--lba'
bad argument to '--ndo'
bad argument to '--vrprotect'
'--vrprotect' requires a value from 0 to 7 (inclusive)
unrecognised option code 0x%x ??
Unexpected extra argument: %s
Not in DEBUG mode, so '-vV' has no special action
1.27 20201029sg_verify: version: %s
'bpc' argument ignored, using --bpc=%lu
count exceed 31 bits, way too large
when the 'ebytchk=BCH' option is given, then '--ndo=NDO' must also be given
giving --0 or --ff is not compatible with --if=%s
'%s' exceeds 65535, so use VERIFY(16)
'lba' exceed 32 bits, so use VERIFY(16)
group number ignored with VERIFY(10) command, use the --16 option
failed to allocate %d byte buffer
-sg_set_binary_modesg_verify: could not open %s for readingabout to wait on STDIN
reading from %s failed at file offset=%d
missing device name!

sg_verify: open error: %s: %s
bad field in %s cdb, near lba=0x%lx
%s medium or hardware error near lba=0x%lx
%s medium or hardware error, reported lba=0x%lx
%s medium or hardware error, reported lba=0x%x
%s MISCOMPARE: started at LBA 0x%lx
%s: %s
    failed near lba=%lu [0x%lx]
Verified %ld [0x%lx] blocks from lba %lu [0x%lx]
    without error
close error: %s
sg_verify failed: Some error occurred, try again with '-v' or '-vv' for more information
016bytchkdpoebytchkgrouphelpinlbanbondoquietreadonlyverboseversionvrprotect0��������������
����#����������L��H��D�����������9��r
l��c���_[���4;8���\�P��d��x�l�zRx�4A,@�0@\�< T��HA ��B�N���x��H����
A-A�C��B�
�	C��D��E����R
������������A-A���� 
�������o��
������	���o���ox���o�o*���o@@@@@@@@@@@@@@@@@@@@@@@@@@@@��@�*0�*S@b�*B0c�*d�*E�*g�*h�*i�*l�*n�*n�*q�*r�*v+V+P/usr/lib/debug/.dwz/aarch64-linux-gnu/sg3-utils.debugl��Yڡ7eE�sr��Rf2f7e4f7b013f62f50182af31698bdc7dc6a35.debug��.shstrtab.interp.note.gnu.build-id.note.ABI-tag.gnu.hash.dynsym.dynstr.gnu.version.gnu.version_r.rela.dyn.rela.plt.init.text.fini.rodata.eh_frame_hdr.eh_frame.init_array.fini_array.dynamic.got.data.bss.gnu_debugaltlink.gnu_debuglink88TT$&xx 4���o��>��`FN���o**H[���oxxPj���tB���~  y@@��@@�@��((z��+�+<��+�+���������������������@�p�pp�pJ��4�